• Steel frame fits onto most standard (36” wide) bed ends
• Composite shelf is rugged for years of dependable service
• Keeps your warehouse organized
• Technicians can roll the beds from warehouse-to-truck-to-customer
• Helps to manage cleaning routines and sanitation protocols

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

FEATURES
• Easy one person delivery & set-up--foot section weighs just 42 lb
• Quick & simple motor attachment or removal for service or cleaning 
• Welded steel split frame construction 
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Scratch-resistant bed ends keep the bed looking new
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0297***

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

FEATURES
• Easy one person delivery & set-up--foot section weighs just 42 lb
• Quick & simple motor attachment or removal for service or cleaning 
• Welded steel split frame construction 
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Scratch-resistant bed ends keep the bed looking new
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0297***

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

FEATURES
• Easy one person delivery & set-up--foot section weighs just 42 lb
• Quick & simple motor attachment or removal for service or cleaning 
• Welded steel split frame construction 
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Scratch-resistant bed ends keep the bed looking new
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0297***

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

• 450 lb. total weight capacity, 350 lb. maximum patient weight capacity
• Telescoping legs are self-leveling
• Strong with a welded steel split spring design and reinforced head section
• Easy assembly with motors & electronics fully removable for easy cleaning of frame
• The easy-to-use pendant control provides motorized positioning of the upper body and knees, and adjusts bed frame height
• The head and foot sections can be raised or lowered both simultaneously or independently
• In case of a power failure, the head and foot section can be lowered by adding two 9V batteries on to the junction box via a simple connection
• HCPCS Code: E0297*

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

• 450 lb* weight capacity, 350 lb. maximum patient weight capacity
• Telescoping legs are self-leveling
• Strong with a welded steel split spring design and reinforced head section
• Easy assembly with motors & electronics fully removable for easy cleaning of frame
• The easy-to-use pendant control provides motorized positioning of the upper body and knees, and adjusts bed frame height
• The head and foot sections can be raised or lowered both simultaneously or independently
• In case of a power failure, the head and foot section can be lowered by adding two 9V batteries on to the junction box via a simple connection
• HCPCS Code: E0297***

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

• 450 lb* weight capacity, 350 lb. maximum patient weight capacity
• Telescoping legs are self-leveling
• Strong with a welded steel split spring design and reinforced head section
• Easy assembly with motors & electronics fully removable for easy cleaning of frame
• The easy-to-use pendant control provides motorized positioning of the upper body and knees, and adjusts bed frame height
• The head and foot sections can be raised or lowered both simultaneously or independently
• In case of a power failure, the head and foot section can be lowered by adding two 9V batteries on to the junction box via a simple connection
• HCPCS Code: E0297***

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.