S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
The ProBasics Group 1 Foam Mattress provides patients with the additional support and comfort they need to prevent pressure sores. Made with premium quality foam, it is designed to offer both effective pressure relief and a comfortable night's sleep.
- Premium quality foam reduces pressure on the bones to prevent bed sores and skin ulcers
- Cover is fluid-resistant and removable
- Non-slip underside keeps mattress firmly in place
- Mattress is fire retardant and meets 16 CFR 1633 requirements
- Ships compact and arrives in super compressed packaging; box footprint is only 14" x 14" x 37"
- Weight capacity: 300 lbs
- Product dimensions: 80" x 36" x 6"
- Limited 12-month warranty
To give patients the necessary additional comfort and support to
prevent pressure sores, purchase the ProBasics Group 1 Foam Mattress.
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:
- Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
- Require special attachments, such as traction equipment, that can only be attached to a hospital bed
- Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help - Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:
- Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
- Require special attachments, such as traction equipment, that can only be attached to a hospital bed
- Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help - Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
- FEATURES
- Easy one person delivery & set-up--foot section weighs just 42 lb
- Quick & simple motor attachment or removal for service or cleaning
- Welded steel split frame construction
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Scratch-resistant bed ends keep the bed looking new
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0297***
PRODUCT SPECIFICATIONS
| Bed Deck Height: | 12.75" minimum. (without casters) 21.5" maximum (with casters) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant | 45.5"x 10.5"x 37" | 107 lb |
| Head/Foot Bed Ends and Casters | 38"x 7.5"x 32.25" | 58 lb |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
***Providers are responsible for determining appropriate billing codes for Medicare Program claims. Information is included only for your convenience and is not intended nor should be considered as Medicare billing advice.
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Bariatric Homecare Bed is a heavy-duty, full-electric bed frame capable of supporting patients up to 600 pounds. Designed with the bariatric patient in mind, the bed frame extends to the edges of the bed deck for better support than most other split-spring bariatric beds.
- Heavy-duty frame ensures strength and patient safety
- Larger sleep surface than conventional bed
- Split-pan design with removable bed ends is easy to set up and no special tools are required
- Hand control motorized positioning of upper body and knees as well as height adjustment provides maximum comfort and versatility to patient and caregiver
- High impact bed end panels are durable, impact and scratch resistant and washable for easy cleaning
- Two locking and two non-locking casters for secure positioning
- Package includes half-length powdered-coated brown vein rails
- Maximum distributed weight capacity = 700 lbs., maximum patient weight capacity = 600 lbs.
- Surface dimensions: 80"L x 42"W
Dimensions: 36" wide x 6" high x 4" deep
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:
- Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
- Require special attachments, such as traction equipment, that can only be attached to a hospital bed
- Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help - Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maintenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:
- Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
- Require special attachments, such as traction equipment, that can only be attached to a hospital bed
- Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help - Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| Mattress | |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
The deluxe stretch nylon cover is durable, fluid-resistant, and washable. It also features a waterfall zipper to prevent any fluids from reaching the foam mattress core. The bottom is constructed with a reinforced vinyl and non-slip protection for added safety.
- Mattress:
- Single layer foam core
- Pressure relief and comfort in three distinct areas: head and shoulders, torso and lower extremities.
- Sculptured surface to maximize airflow
- Support and pressure relief that is far superior to conventional innerspring mattresses.
- Deluxe Stretch Nylon Cover
- Durable
- Waterfall Zipper
- Fluid-resistant
- Washable
- Urethane laminate to reduce friction, shear & contamination
- Bottom is reinforced vinyl with non-slip protection
- Each corner includes elastic straps to secure the mattress to the bed deck
- Compressed, rolled and boxed for cost-efficient shipping and delivery
- Weight Capacity: 350 lbs.
- Meets California Flame Retardant Standards TB 117 and Federal Standard 16 CFR 1633.
- Warranty: Two years on foam core/one year cover
- HCPCS Code: E0184*
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Multi-density foam provides a surface that can help reduce the occurrence of pressure sores and with a special heel foam section patients are less likely to develop sores on their feet. The urethane-backed, fluid-resistant zippered cover makes clean up easier.
In just a few minutes the mattress is ready for patients up to 600 lbs. and provides a comfortable 42” x 80” x 6” sleeping surface.
Features
• Compressed Group 1 Foam to help reduce and prevent pressure sores
• Multi-density foam layers for patient comfort
• Smaller footprint for easier delivery and shipping savings
• Supports those up to 600 lbs.
• Fluid-resistant zippered cover for easier cleaning
• Each corner includes elastic straps to secure the mattress to the bed deck
• 1-year limited warranty
Specifications
• Shipping dimensions: 14” x 14” x 44 1/2”, 27.6 lbs.
• Product dimensions: 42” x 80” x 6”, 24.25 lbs.
• Warranty: 1-year Limited
• Safety: Meets 16 CFR Part 1633, No added flame-retardant chemicals
The Meridian Medical Aruba- 42 Bariatric Foam Mattress Informational Video-
Click HERE to view our video!
Click HERE to view our video!
WARNING: This product can expose you to chemicals including Diethylhexyl phthalate (DEHP), which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Full Electric Bed with low bed capability is a standard three motor full-electric bed designed with the safety and convenience in mind. Strong steel frame combined with scratch-resistant beds ends will keep this bed looking great for many years.
Split-spring design allows for one-person delivery, but with all the benefits of traditionally styled and heavier beds.
- 450 lb. total weight capacity, 350 lb. maximum patient weight capacity
- Telescoping legs are self-leveling
- Strong with a welded steel split spring design and reinforced head section
- Easy assembly with motors & electronics fully removable for easy cleaning of frame
- The easy-to-use pendant control provides motorized positioning of the upper body and knees, and adjusts bed frame height
- The head and foot sections can be raised or lowered both simultaneously or independently
- In case of a power failure, the head and foot section can be lowered by adding two 9V batteries on to the junction box via a simple connection
- HCPCS Code: E0297*
PRODUCT SPECIFICATIONS
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* / 350 lb maximum patient weight |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| Mattress | |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
| *Total
distributed weight capacity including user, mattress, bedding, and any
other items on the bed surface. Please refer to the owner's manual for
complete details. **Please see owner's manual for complete warranty details. ***Providers are responsible for determining appropriate billing codes for Medicare Program claims. Information is included only for your convenience and is not intended nor should be considered as Medicare billing advice. |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Full Electric Bed with low bed capability is a standard three motor full-electric bed designed with the safety and convenience in mind. Strong steel frame combined with scratch-resistant beds ends will keep this bed looking great for many years.
Split-spring design allows for one-person delivery, but with all the benefits of traditionally styled and heavier beds.
- 450 lb* weight capacity, 350 lb. maximum patient weight capacity
- Telescoping legs are self-leveling
- Strong with a welded steel split spring design and reinforced head section
- Easy assembly with motors & electronics fully removable for easy cleaning of frame
- The easy-to-use pendant control provides motorized positioning of the upper body and knees, and adjusts bed frame height
- The head and foot sections can be raised or lowered both simultaneously or independently
- In case of a power failure, the head and foot section can be lowered by adding two 9V batteries on to the junction box via a simple connection
- HCPCS Code: E0297***
PRODUCT SPECIFICATIONS
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* / 350 lb maximum patient weight |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
BED PACKAGE COMPONENTS:
| |
|---|---|
| *Total
distributed weight capacity including user, mattress, bedding, and any
other items on the bed surface. Please refer to the owner's manual for
complete details. **Please see owner's manual for complete warranty details. ***Providers are responsible for determining appropriate billing codes for Medicare Program claims. Information is included only for your convenience and is not intended nor should be considered as Medicare billing advice. |