S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsThe ProBasics Folding Walkcane Hemi Walker provides
patients with the comfortable, stabilized travel assistance they need. Its
aluminum frame allows it to be durable while still being lightweight and
compact.
- Durable, anodized aluminum frame
- Lightweight compact design folds easily for easy storage and transport
- Special angled foot pieces provide stability
- Includes handgrips for added convenience and comfort
- Adjustable height from 28.5" - 33.5" to accommodate a range of patients
- 2-year warranty on frame
- Quantity: 4/case
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
- Attractive, lightweight aluminum frame
- Sure lever release folding mechanism allows users to close the walker without removing their hands from the walker handle
- Each side operates independently to allow easy movement through narrow spaces and greater stability while standing
- Front cross brace near top of walker allows for full stride
- Adjustable height settings
- Vinyl contoured hand grip for added comfort and long lasting wear
- Folds flat for transport and storage
- HCPCS* Code: E0135 (without wheels); E0143 (with wheels)
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
This is the replacement Hand Pendant for the ProBasics 42" Bariatric Bed (#PB42BARBED). It is only the pendant and does not include motor or any other parts of the bed.
- Replacement pendant for 42" Bariatric Bed (#PB42BARBED)
- Allows patient or caregiver to easily adjust head and foot sections as well as bed height
- Sold individually
- Attractive, lightweight aluminum frame
- Sure lever release folding mechanism allows users to close the walker without removing their hands from the walker handle
- Each side operates independently to allow easy movement through narrow spaces and greater stability while standing
- Front cross brace near top of walker allows for full stride
- Adjustable height settings
- Vinyl contoured hand grip for added comfort and long lasting wear
- Rear glide cap allows for walker to slide easily and smoothly over most surfaces (standard on models with 5" wheels)
- Folds flat for transport and storage
- HCPCS* Code: E0135 (without wheels); E0143 (with wheels)
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
- 1-inch steel frame construction provides superior strength
- Easy-to-use push button folding mechanism provides audible click when locked
- Each side operates independently to allow easy movement through narrow spaces and greater stability while standing
- Front cross brace near top of walker allows for full stride
- Side bar adjusts with height to provide additional support
- Adjustable height settings
- Vinyl contoured hand grip for added comfort and long lasting wear
- Rear glide cap allows for walker to slide easily and smoothly over most surfaces (come standard on models with 5" wheels)
- Folds flat for transport and storage
- HCPCS* Code: E0135 (without wheels) E0143 (with wheels)
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
The Bariatric Offset Cane assists bariatric patients in
travel, made of reinforced tubing and a wider base for increased stability and
support. Its design allows for easy height adjustment to accommodate a
range of patients with a simple push of a button.
- Solid brass, push button adjustment for extra stability
- Handle height adjusts in 1" increments from 29" to 38"
- Secured with a locking ring for added safety
- Comfortable, black, PVC handgrip
- Weight capacity: 500 lbs
- Quantity: 20/case
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
Bed Height: | 15" min. to 20" max. (without mattress) |
Sleep Surface: | 80"L x 36" W |
Overall Bed: | 87"L x 36" W |
Weight Capacity: | 450 lb |
Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
Component: | Carton Size: | Shipping Weight: |
Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
Bed Rails | |
---|---|
PB7035 | Half Bed Rails |
Mattress | |
ARUBA-200 | ARUBA-200 Cross-cut Mattress |
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
Bed Height: | 15" min. to 20" max. (without mattress) |
Sleep Surface: | 80"L x 36" W |
Overall Bed: | 87"L x 36" W |
Weight Capacity: | 450 lb |
Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
Component: | Carton Size: | Shipping Weight: |
Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
Bed Rails | |
---|---|
PB6034 | Full Bed Rails |
Mattress | |
ARUBA-200 | ARUBA-200 Cross-cut Mattress |
About The Mask
The Roscoe Zzz-Mask Full Face CPAP Mask with Comfort Cushion is made of high-quality clear silicone with a virtually indestructible frame. The lightweight mask comes complete with headgear and dual 360° swivel port which allows for free movement and easy connection at the tubing attachment point. The mask is dishwasher safe and comes complete with headgear
Features
• Made of high-quality, lightweight, clear silicone with a flexible design
• Dual 360° swivel port at the tubing attachment point
• Air vent holes and one-way valve design help to reduce CO2 retention
• Made with half the parts of popular brands, meaning less patient confusion
• Headgear with hook-and-loop fasteners provide maximum versatility and movement
• Free of natural rubber products • Dishwasher safe for easy cleaning
• Quick release clips conveniently allow mask to be easily removed without readjusting headgear
• 90-day Limited Warranty