INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.

Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries. The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.

FEATURES
• Easy to transport - foot section weighs just 42 lb.
• Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0295*

PRODUCT SPECIFICATIONS

Bed Height:	15" min. to 20" max. (without mattress)
Sleep Surface:	80"L x 36" W
Overall Bed:	87"L x 36" W
Weight Capacity:	450 lb
Limited Warranty:	5 Years on Frame 2 Years on Motor - mechanical/electrical

INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:

1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
   •    Severe arthritis and other injuries to lower extremities
   •    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
         and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

SHIPPING SPECIFICATIONS

Component:	Carton Size:	Shipping Weight:
Foot/Head Springs Motor Box, and pendant	45.5"x 10.5"x 37"	104 lb.
Head/Foot Bed Ends and Casters	38"x 7.5"x 32.25"	56 lb.

BED PACKAGE COMPONENTS

Bed Rails
PB6034	Full Bed Rails
Mattress
PBHBMATIS	80 Inner-Spring Mattress

This Firm Support Innerspring Mattress provides the firmness and support patients need. For use in homecare, nursing homes, and hospitals.

• Easy-to-clean vinyl cover is durable and fluid-resistant
• High quality 312 bonnell coil provides resilient support base
• 2oz densified polyester fiber topper adds firmness and support
• Heavy-duty resinated pad with a specialized mesh woven back
• Meets 16 CFR 1633 flammability standard
• One year warranty

The stylish ProBasics Deluxe Height Adjustable Aluminum Rollator features a unique design allowing the user to adjust the seat and handle height to their specifications for maximum comfort and universal fit (adjusts from junior to adult size with one rollator). This lightweight rollator features easy-to-operate ergonomic hand brakes and 8-inch wheels for great maneuverability and stability. A seamless padded flip-up seat with zipper compartment and large nylon storage pouch keeps belongings private and protected.

• Ergonomic handles with loop-style brakes are adjustable in one-inch increments from 30" - 38" with self-threading knobs
• Height adjustments on frame allows seat height to be adjusted in one-inch increments from 18" to 22"
• Comes with a padded flip-up seat with zipper pouch for storage of personal items and added security
• Additional roomy and convenient storage pouch attaches to frame easily and keeps larger belongings protected
• Removable padded curved backrest is equipped with a hinge so it can flip up for easy storage
• 8-inch non-marring black wheels with soft grip tires glide on almost any surface
• Lightweight aluminum frame is durable for years of worry-free use
• Folds up easily for easy transport and storage
• First Time Assembly Required
• HCPCS Code*: E0143, E0156

*Providers are responsible for determining billing codes for Medicare Program claims. This information is included for your convenience and is not intended, nor should it be considered billing advice.

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

The ProBasics Bariatric Homecare Bed is a heavy-duty, full-electric bed frame capable of supporting patients up to 600 pounds. Designed with the bariatric patient in mind, the bed frame extends to the edges of the bed deck for better support than most other split-spring bariatric beds. The hand pendant features dynamic client positioning, allowing the consumer or caregiver to change the positioning of the head and foot sections as well as the bed height. Despite its size, bed setup within the home is easy - no special tools are needed.

• Heavy-duty frame ensures strength and patient safety.
• Larger sleep surface than conventional bed.
• Split-pan design with removable bed ends is easy to setup.
• Motorized positioning of upper body and knees as well as height adjustment provides maximum comfort and versatility to patient and caregiver.
• High impact bed end panels are durable, impact and scratch resistant and washable for easy cleaning.
• Hand control allows for multiple bed positioning for patients.
• Two locking and two non-locking 5" casters for secure positioning.
• No tools necessary for set up. Ships in three cartons*.
• Emergency crank provided in the event of a power failure
• Maximum distributed weight capacity = 700 lbs., maximum patient weight capacity = 600 lbs.

The ProBasics Reclining Manual Wheelchair provides full back and headrest support as patient reclines from 90 to 160 degrees. The 13-inch headrest and padded, full-length arms are removable. Black, easy-to-clean, comfortable vinyl upholstery that accommodates a wide range of users. The frame has a chip-resistant silver vein finish. Mag-style wheels are lightweight and set back on frame to prevent patient from tipping when in the reclined position.

• Slide tube steel frame with an attractive silver vein finish that is chip resistant and easy to maintain
• Padded Desk-length, detachable armrests provide added patient comfort
• Easy-to-clean, comfortable vinyl upholstery that accommodates a wide range of users
• Chart pocket on backrest provides additional convenience
• Tool-free elevating padded legrests are equipped with a pneumatic piston for infinite positions and composite footplates
• Composite handrims with mag-style wheels are lightweight and maintenance free
• Wheels are set back on frame to prevent tipping
• Rear anti-tippers come standard
• Headrest extension comes standard with head immobilizer
• 8" x 1" solid rubber front casters
• Easy push-to-lock wheel locks
• HCPCS* Code: K0001/K0006 - E1226 (reclining back) - E0966 (headrest extension) - E0990 (elevating legrests only)

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
 
 

These scratch resistant ProBasics Bed Ends keep your single motor bed looking brand new. For use with ProBasics Single Motor Bed (#PBSMB).  

• Bed ends for ProBasics Single Motor, Semi-Electric Bed (#PBSMB). To be used with Single Motor Bed Head and Foot Spring Sections (#HBSMSS).
• Scratch resistant and high impact to keep bed looking new with little maintenance
• Comes with 2 locking and 2 non-locking casters
• Included in all ProBasics Semi-Electric Single Motor Bed Packages

For durable bed end panels that keep your ProBasics Single Motor Bed looking great, purchase your ProBasics Bed Ends. 

The Fiber Core Mattress with Polypropylene Cover provides patients with the comfort and support they need. It is more economical than foam and lighter than innerspring mattresses while remaining high-quality and functional.

• 100% virgin densified polyester fiber is more economical than foam
• Lighter weight than innerspring mattress, reduces shipping costs
• Breathable polypropylene cover keeps patient cool and comfortable
• Mattress and vinyl cover are odor free and non-toxic
• Cover is waterproof; 100% recyclable; odor, stain, and mold resistant
• Meets Federal Fire Code 16 CFR 1633
• Dimensions: 80" x 35" x 6"
• Weight capacity: 300 lbs
• One-year warranty on fiber core and cover

For a lighter, more economic mattress option, purchase your Fiber Core Mattress with Polypropylene Cover. 
 
 
Note: 
This product may release low levels of volatile organic compounds (VOCs) after unpacking. This process, known as off-gassing, is normal and temporary. VOC emissions typically dissipate within a few days, depending on ventilation and environmental conditions.  We recommend placing the item in a well-ventilated space to help it clear more quickly.

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maintenance.

Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries. The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.

FEATURES
• Easy to transport - foot section weighs just 42 lb.
• Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0295*

PRODUCT SPECIFICATIONS

Bed Height:	15" min. to 20" max. (without mattress)
Sleep Surface:	80"L x 36" W
Overall Bed:	87"L x 36" W
Weight Capacity:	450 lb
Limited Warranty:	5 Years on Frame 2 Years on Motor - mechanical/electrical

INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:

1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
   •    Severe arthritis and other injuries to lower extremities
   •    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
         and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

SHIPPING SPECIFICATIONS

Component:	Carton Size:	Shipping Weight:
Foot/Head Springs Motor Box, and pendant	45.5"x 10.5"x 37"	104 lb.
Head/Foot Bed Ends and Casters	38"x 7.5"x 32.5"	56 lb.

BED PACKAGE COMPONENTS

Bed Rails
PB6034	Full Bed Rails

INDICATIONS FOR USE:

Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:

1.     Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration

2.     Require special attachments, such as traction equipment, that can only be attached to a hospital bed

3.     Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:

•    Severe arthritis and other injuries to lower extremities

•    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,

      and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help

4.     Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.

Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries. The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.

FEATURES
• Easy to transport - foot section weighs just 42 lb.
• Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
• Head and foot sections can be raised independently or simultaneously
• Large button, simple-to-use hand pendant
• Manual crank at the foot adjusts the frame height
• Scratch-resistant bed ends keep the bed looking new
• 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
• Headspring support and foot assembly are recessed to help reduce pinching and injuries
• Trendelenberg and reverse Trendelenberg position capable
• Beds include two locking and two non-locking casters
• Quiet, efficient ETL-approved DC low voltage single motor box
• HCPCS Code: E0295*

PRODUCT SPECIFICATIONS

Bed Height:	15" min. to 20" max. (without mattress)
Sleep Surface:	80"L x 36" W
Overall Bed:	87"L x 36" W
Weight Capacity:	450 lb
Limited Warranty:	5 Years on Frame 2 Years on Motor - mechanical/electrical

INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:

1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
   •    Severe arthritis and other injuries to lower extremities
   •    Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
         and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.

SHIPPING SPECIFICATIONS

Component:	Carton Size:	Shipping Weight:
Foot/Head Springs Motor Box, and pendant	45.5"x 10.5"x 37"	104 lb.
Head/Foot Bed Ends and Casters	38"x 7.5"x 32.25"	56 lb.

BED PACKAGE COMPONENTS

Bed Rails
PB6034	Full Bed Rails
Mattress
PBHBMATFB	Fiber Core Mattress

The ProBasics K7 Heavy Duty Wheelchair features a robust design to accommodate patients with wider seat and higher weight capacity requirements. With seat widths from 24 to 28 inches, a weight capacity of 450 - 600 pounds and a heavy-duty slide tube frame, the ProBasics K7 offers a rugged yet attractive option for the bariatric patient population.

• Heavy Duty, slide tube silver vein steel frame
• 8" x 2" semi-pneumatic casters are adjustable in 3 positions
• 24" rear urethane wheels with durable hand rims
  
• Removable desk length arms with padded armrests
• Heavy duty vinyl padded upholstery
• Easy push-to-lock wheel locks
• HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)
  

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .

The ProBasics K7 Heavy Duty Wheelchair features a robust design to accommodate patients with wider seat and higher weight capacity requirements. With seat widths from 24 to 28 inches, a weight capacity of 450 pounds and a heavy-duty slide tube frame, the ProBasics K7 offers a rugged yet attractive option for the bariatric patient population.

• Heavy Duty, slide tube silver vein steel frame
• 8" x 2" semi-pneumatic casters are adjustable in 3 positions
• 24" rear urethane wheels with durable hand rims
• Removable desk length arms with padded armrests
• Heavy duty vinyl padded upholstery
• Easy push-to-lock wheel locks
• HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)
  

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .

The ProBasics K1 Manual Wheelchair combines style and durability at an affordable price. Standard features include flip back removable padded armrests, easy-to-clean vinyl upholstery, chart pocket and heel loops on the front riggings. Supporting patient weights up to 250 pounds, the ProBasics K1 Standard Wheelchair is a popular choice among providers. Available with swing-away footrests or elevating legrests.

• Slide tube steel frame in black powder coat finish
• Single axle positioning
• Easy-to-clean, comfortable vinyl upholstery 
• Flip-back, padded, upholstered armrests are removable
• Chart pocket on back for additional convenience
• Includes tool-free swing-away footrests with heel loops or elevating padded legrests with composite footplates
• Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
• Easy push-to-lock wheel locks
• Composite handrims with 24" solid urethane tires
• 8" x 1" solid rubber front casters
• Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
• HCPCS* Code: K0001 | K0195 OR E0990 (elevating legrests only)

WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov