S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
- Heavy Duty, slide tube silver vein steel frame
- 8" x 2" semi-pneumatic casters are adjustable in 3 positions
- 24" rear urethane wheels with durable hand rims
- Removable desk length arms with padded armrests
- Heavy duty vinyl padded upholstery
- Easy push-to-lock wheel locks
- HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patient and/or their caregiver for proper positioning of patients who:
- Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
- Require special attachments, such as traction equipment, that can only be attached to a hospital bed
- Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help - Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
The Roscoe Elevating Legrests offer a variety of angles and elevating positions. They adjust the patient's legs to any possible position, making them perfect for cast positioning and accommodating patients with limited motion in their knees.
- Equipped with pneumatic piston for infinite elevating positions
- Tool free and easy to install
- Legrests are padded for patient comfort
- Composite footplates included
- Designed for use with Roscoe K3, and K4 wheelchairs
- Sold by the pair
To provide patients with a variety of leg elevation positions with their wheelchair, purchase the Roscoe Elevating Legrests.
WARNING: This product can expose you to chemicals
including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer or birth defects or other reproductive harm.
For more information, visit www.P65Warnings.ca.gov.
- Slide tube steel frame in black powder coat finish
- Single axle positioning
- Easy-to-clean, comfortable vinyl upholstery
- Flip-back, padded, upholstered armrests are removable
- Chart pocket on back for additional convenience
- Includes tool-free swing-away footrests with heel loops or elevating padded legrests with composite footplates
- Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
- Easy push-to-lock wheel locks
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- HCPCS* Code: K0001 | K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
The ProBasics K2 Standard Hemi Wheelchair is designed to meet a variety of patient profiles. With a patient weight capacity of 300 pounds, a dual axle for hemi-height adjustment and multi-position caster forks, it is one of the more versatile wheelchairs on the market today. Standard features include flip back removable padded armrests, easy-to-clean vinyl upholstery, chart pocket and heel loops on the front riggings.
- Slide tube, powder-coated silver vein steel frame
- Dual axle provides easy transition of seat height to hemi-level
- Easy-to-clean, comfortable vinyl upholstery
- Flip-back, padded, upholstered armrests are removable
- Chart pocket on back for additional convenience
- Includes elevating padded legrests with composite footplates
- Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
- Easy push-to-lock wheel locks
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- HCPCS* Code: K0002, K0001
K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
Mesh sling offers total head, neck and partial under-thigh support. Easy-to-use sling aids in transferring users from a bed to a wheelchair, toilet or shower chair or from the floor to a bed. Use with the ProBasics Hydraulic Lift (Item # PB0087X).
- Four point strap hookup
- Mesh polyester sling is washer safe (see instructions on sling label)
- Can be used in wet or dry environments
- Brushed lining helps prevent sliding and protects skin
- Size: Medium (41.5" x 53.3")
- Commode opening: 11" L x 8.5" W
- Weight Capacity: 450 lb
- Color: Blue
- HCPCS Code: E0621
- 1-inch steel frame construction provides superior strength
- Easy-to-use push button folding mechanism provides audible click when locked
- Each side operates independently to allow easy movement through narrow spaces and greater stability while standing
- Front cross brace near top of walker allows for full stride
- Side bar adjusts with height to provide additional support
- Adjustable height settings
- Vinyl contoured hand grip for added comfort and long lasting wear
- Rear glide cap allows for walker to slide easily and smoothly over most surfaces (come standard on models with 5" wheels)
- Folds flat for transport and storage
- HCPCS* Code: E0135 (without wheels) E0143 (with wheels)
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
- Heavy Duty, slide tube silver vein steel frame
- 8" x 2" semi-pneumatic casters are adjustable in 3 positions
- 24" rear urethane wheels with durable hand rims
- Removable desk length arms with padded armrests
- Heavy duty vinyl padded upholstery
- Easy push-to-lock wheel locks
- HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)
INDICATIONS FOR USE:
Designed and developed for patients with permanent, long-term disabilities and conditions, the ProBasics Electric Hospital Beds are intended to provide assistance to a patients and/or their caregiver for proper positioning of patients who:
1. Require the elevation of the head of the bed 30 or more degrees most of the time due to, but not limited to, congestive heart failure, chronic pulmonary disease, or problems with aspiration
2. Require special attachments, such as traction equipment, that can only be attached to a hospital bed
3. Require an adjustable bed to permit transfers to chair, wheelchair, or standing position. This includes, but is not limited to:
• Severe arthritis and other injuries to lower extremities
• Spinal cord injuries (including quadriplegia and paraplegia), muscular dystrophies, multiple limb amputations,
and stroke, where the patient is able to transfer from a bed to a wheelchair with or without help
4. Require frequent changes in body position or might require an immediate need for a change in body position to avert a life threatening situation.
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
- FEATURES
- Easy one person delivery & set-up--foot section weighs just 42 lb
- Quick & simple motor attachment or removal for service or cleaning
- Welded steel split frame construction
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Scratch-resistant bed ends keep the bed looking new
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0297***
PRODUCT SPECIFICATIONS
| Bed Deck Height: | 12.75" minimum. (without casters) 21.5" maximum (with casters) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant | 45.5"x 10.5"x 37" | 107 lb |
| Head/Foot Bed Ends and Casters | 38"x 7.5"x 32.25" | 58 lb |
BED PACKAGE COMPONENTS
| Bed Rail | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| PBHBMATFB | Fiber Core Mattress |
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
***Providers are responsible for determining appropriate billing codes for Medicare Program claims. Information is included only for your convenience and is not intended nor should be considered as Medicare billing advice.
Mesh sling offers total head, neck and partial under-thigh support. Easy-to-use sling aids in transferring users from a bed to a wheelchair, toilet or shower chair or from the floor to a bed. Use with the ProBasics Hydraulic Lift (Item # PB0087X).
- Four point strap hookup
- Mesh polyester sling is washer safe (see instructions on sling label)
- Can be used in wet or dry environments
- Brushed lining helps prevent sliding and protects skin
- Size: medium (41.5" x 53.3")
- Weight Capacity: 450 lb
- Color: Blue
- HCPCS Code: E0621
Mesh sling offers total head, neck and partial under-thigh support. Easy-to-use sling aids in transferring users from a bed to a wheelchair, toilet or shower chair or from the floor to a bed. Use with the ProBasics Hydraulic Lift (Item # PB0087X).
- Four point strap hookup
- Mesh polyester sling is washer safe (see instructions on sling label)
- Can be used in wet or dry environments
- Brushed lining helps prevent sliding and protects skin
- Size: Large (45.5" x 58.3")
- Commode opening: 11" L x 8.5" W
- Weight Capacity: 450 lb
- Color: Blue
- HCPCS Code: E0621
- Heavy Duty, slide tube silver vein steel frame
- 8" x 2" semi-pneumatic casters are adjustable in 3 positions
- 24" rear urethane wheels with durable hand rims
- Removable desk length arms with padded armrests
- Heavy duty vinyl padded upholstery
- Easy push-to-lock wheel locks
- HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)