The Safe-T-Guard perimeter cover reduces the risk of falls and entrapment. It fits all standard-size hospital mattresses as well as standard eight inch alternating air mattresses. It fits snug with three quick-release straps (positioned top, bottom and middle) that connect underneath the mattress. The quilted top is water resistant and has a covered foam border that rises approximately four inches above the mattress surface and is sloped inward to reduce the risk of roll outs.

• Includes cover and 4 foam inserts
• Perimeter cover to reduce the risk of falls and entrapment
• Foam inserts sloping inward to reduce the risk of patient roll out
• Separation to allow for patient egress
• Nylon, polyurethane construction to reduce heat build-up
• Quilting on the top surface for comfort
• 36" wide x 80" long x 8" high
  
• One-year limited warranty

WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov .

• Includes mattress, cover and pump
• Features a 5" alternating pressure upper surface combined with an integrated 3" foam base to provide a full eight inches of therapeutic support with bottom-out protection in the event of a power failure
• Separate compartment for foam base inside polyurethane cover prevents soiling
• System includes mattress, cover and pump
• Mattress and pump come with a 2-year warranty
• Quick disconnect cells for easy cell replacement
• Air cells made with nylon/polyurethane for increased durability and reliability
• CPR quick deflate located at the head of the mattress
• Quilted cover, moisture resistant, vapor permeable nylon; low shear/low friction
• Pump is an 8 liter-per-minute pump in an easy-to-use design
• 10 minute cycle time
• Front panel switch provides two modes of therapy - static or alternating
• Variable pressure setting allows for maximum comfort
• Adjustable pressure range: 20 mmHg â 70 mmHg
• Supports patients up to 325 lbs.
• HCPCS Code: E0277

"Pump: WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov . Mattress: WARNING: This product can expose you to chemicals including Styrene and Toluene, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov ."

The Meridian SatinAir Adjustable Alternating Pressure Pump and Pad System is designed to be placed over an existing mattress and is both easy to use and maintain. The compact, quiet pump alternately inflates and deflates air cells in the pressure pad and comes standard with a variable pressure setting for maximum patient comfort and compliance. The pump features an output of five liters per minute with a five minute cycle time, and can be mounted on the bed with built-in brackets.

FEATURES:

• 5 liter-per-minute pump alternately inflates and deflates air cells over a 5 minute cycle time
• Variable pressure setting for added patient comfort
• Pump can be mounted on the bed with built-in bracket
• Pad includes flaps that wrap around mattress for better stability
• Does not contain latex
• Support patients up to 300 lbs.
• One-year limited warranty on pump, 90-days limited warranty on pad
  
• HCPCS Code: E0181 pump
• HCPCS Code:A4640 replacement pad

CELL CONSTRUCTION

• Durable, heavy gauge, premium vinyl
• 130 individual bubble cells for maximum comfort and effectiveness
• Head and foot flaps secure pad to mattress and minimize movement

PUMP

• 5 liter-per-minute pump alternately inflates and deflates air cells over a 5 minute cycle time
• Variable pressure setting for maximum comfort

The Meridian SatinAir is a combination therapy mattress system that provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration. The pump offers a static feature as well as adjustable comfort settings by patient weight. The nylon zipper cover is low shear, fluid-resistant and vapor permeable. CPR valve allows for quick deflation. The Meridian SatinAir is an innovative design ideal for use in nursing homes, hospitals and the home care environment.

• Includes mattress, cover and pump
• Pillow function maintains the air in cells at the head for patient comfort
• Air cells can be easily removed and replaced
• CPR quick deflate at head of mattress
• Quilted nylon zipper cover is low shear, fluid-resistant, and vapor permeable
• 8 liter-per-minute pump in an easy-to-use design
• Two modes of therapy - static or alternating
• Variable pressure setting for maximum comfort
• Support patients up to 350 lbs.
• One year warranty on mattress and pump
• HCPCS Code: E0277

CELL CONSTRUCTION

• Seventeen rows of 8"alternating pressure air cells, 9 with laser holes.
• Air cells made of nylon/pvc and can be easily cleaned, removed and replaced

COVER

• Zipper cover is quilted vapor permeable nylon
• Water-resistant
• Easy cleaning
• Low shear/low friction

CPR QUICK DEFLATE

• CPR quick deflate at head of mattress

PUMP

• 8 liter-per-minute pump
• Front panel switch provides two modes of therapy - static or alternating
• LED backlit switches with dial on panel for simple set up and operation