The Roscoe® EasyPulse 5 is a small, lightweight oxygen conserving device, weighing in just over half a pound. Single dial control and ergonomically designed T-Handle/Hand Tight Nut make setting and connecting the EasyPulse 5 easy for any patient or caregiver. The EasyPulse 5 has 5 pulse settings and a 2 LPM continuous flow setting. With a conserving ratio of up to 5.7:1, the EasyPulse 5 reduces deliveries of cylinders to patients and its proven pneumatic reliability, robust design and lack of batteries helps to reduce overall operating costs.

The EasyPulse 5 utilizes Controlled Minute Volume (CMV) Oxygen Conserving Technology. The patented CMV Technology delivers a pulse algorithm wave form, superior trigger sensitivity and fast delivery time. All this is accomplished pneumatically with a single lumen cannula.

The Roscoe Swivel Connector connects oxygen tubing and helps prevent tubing from tangling, kinking, and torquing. This connector is perfect for patients who move frequently, as it increases mobility by providing "swivel action" between tubing.

• Swivel connection of oxygen tubing provides increased mobility for patients who move frequently
• Provides maximum safety, as it prevents tubing from tangling and disrupting the flow of oxygen
• Rotates 360 degrees
• Male/male connector
• Quantity: 50/bag

For increased safety and mobility in your oxygen therapy, purchase the Roscoe Swivel Connector.

The Roscoe Water Trap collects water and moisture that may form during oxygen therapy. It traps the condensation from the system, preventing water from entering the patient's nose.

• For use with in-line concentrators
• Disposable
• Clear for visual inspection of water build-up
• Quantity: 50/case

To give patients the benefit of humidification therapy without condensation entering their nose, purchase the Roscoe Water Trap.

The OxySafe Cannula Valve helps protect against oxygen tubing fires, designed to put out fire and stop the flow of oxygen if the delivery tube is accidentally ignited. It is bi-directional in design and can be installed either way around in the oxygen delivery tubing.

• Will put out oxygen delivery tube fire and stop flow of oxygen if tube is ignited
• Installation of at least two valves recommended: one close to the patient and one close to the source of the supply
• Intended for use with oxygen supply equipment that does not exceed 87 psi when outlet is blocked
• Intended for single-patient use
• Maintenance free, replace after 4 years
• Quantity: 100/case

To keep patients safe from oxygen tubing fires, purchase the OxySafe Bi-Directional Cannula Valve.

The Salter In-Line Water Trap collects water and moisture that may form during oxygen therapy. It traps the condensation from the system, preventing water from entering the patient's nose.

• For use with in-line concentrators
• Simple, durable design that minimizes hazard of snagging on furniture
• Screw-on end caps
• Clear for visual inspection of water build-up
• Quantity: 25/case

To give patients the benefit of humidification therapy without condensation entering their nose, purchase the Salter In-Line Water Trap.

The Salter Tubing Swivel Connector connects oxygen tubing and is designed to eliminate tangling, twisting, and kinking. This connector is perfect for patients who move frequently, as it increases mobility by providing "swivel action" between tubing.

• Swivel connection of oxygen tubing provides increased mobility for patients who move frequently
• Provides maximum safety, as it prevents tubing from tangling and disrupting the flow of oxygen
• Raised barbed ends for a tight and secure connection
• Male/male connector
• Quantity: 25/case

For increased safety and mobility in your oxygen therapy, purchase the Salter Tubing Swivel Connector.  

The Salter PRO2 Check Elite Oxygen Concentration Indicator accurately indicates the O2 percentage, output pressure, and output flow from concentrators. It makes it easy to check the quality of oxygen, connecting to concentrators with standard tubing and presenting results clearly on LCD display.

• Includes three operation modes: pressure (measured in PSIG or kPa), flow (measured in LPM), and oxygen concentration (measured in percent)
• Calibrated out of box; calibration is not affected by temperature or altitude to ensure accuracy
• Connects to concentrator with standard oxygen supply tubing
• Easy-to-read LCD display
• Operates on 9 volt battery
• Automatically shuts off after 5 minutes to preserve battery
• Compact and portable; comes with carrying case

The Salter 3-Channel Oxygen Tubing provides patients with an uninterrupted flow of oxygen for utmost safety. It is kink-resistant and crush-proof with rounded and tapered edges to prevent snagging on other surfaces.

• 3-channel design is kink- and crush-resistant, allowing for a safe, uninterrupted flow of oxygen
• Made of soft, comfortable, and disposable material
• Includes male thread grip and ribbed connector for easy connections
• Lies straight when uncoiled to minimize pull on the cannula
• Rounded and tapered edges won't snag or catch on other surfaces
• 15" length, available in a variety of other lengths
• Clear
• Quantity: 50/case

For safe and reliable oxygen therapy, purchase the Salter 3-Channel Oxygen Tubing. 

This Humidifier Adapter Kit allows for patients to attach their humidifier bottle to their oxygen concentrator for humidified oxygen therapy. It is compatible with all models of Invacare Mobilaire concentrators.

• Attaches humidifier bottle to oxygen concentrator for more comfortable, humidified oxygen therapy
• Durable, kink-proof tubing
• For use on all models of Invacare Mobilaire oxygen concentrators
• Sold individually

To easily and safely connect your humidifier bottle to your Invacare Mobilaire oxygen concentrator, purchase your Humidifier Adapter Kit.

The Salter E-Z Wraps add comfort to cannulas to reduce pressure on skin and prevent ear chafing. They easily wrap around and slide over cannula tubing to provide a soft cushion around the ear.

• Soft foam adds cushioning that provides comfort and prevents ear chafing
• Easily slide over the head or face tube of an oxygen cannula, molding to tube
• Closed-cell foam repels moisture to best protect skin
• Quantity: 50/case

To prevent air chafing typically associated with regular cannula use, purchase the Salter E-Z Wraps.

The Christmas Tree Adapter helps secure tubing to oxygen concentrator and prevent leakage during operation. It can be used on multiple concentrators and with a variety of tubing.

• Helps better connect oxygen tubing that may not fit concentrator properly
• Tapered and barbed connector securely holds tubing in place
• Swivel style
• Quantity: 50/pack
• Compatible with multiple concentrators and oxygen tubing

To securely connect tubing to your oxygen concentrator, purchase the Christmas Tree Adapter.

This No Smoking Sign helps keep facilities safe and prevent injuries. It's easy to read and visible, with large red ink printed on white cover stock.

• Features "no cigarettes" symbol and states "Oxygen in Use / No Smoking / No Fumar"
• 7-1/2" square printed in red ink on white cover stock
• Non-adhesive; includes hole on top for displaying
• Quantity: 100/pack

To help keep your facility and its patrons safe, purchase the No Smoking Sign.